![]() ![]()
To mount a lens the aperture should be set at f/5.6 as the prong of the lens will fit into exposure meter coupler of the camera. #Gale subwoofer manual serial numbers#In front of the serial numbers on the top plate of all models the model name is engraved. Only the last models could be fitted with a winder. All models are made of strong metal with a swinging back door, glass prism viewfinder, self timer, mirror lock-up facility (not FS), double flash contacts, DOF-preview button, rewind crank, but missing a flash or accessory shoe on top (FT2 and later models do have one).Īll versions - except the FS - were available in chrome and black. Now we all know that this shutter a good choice as many Nikkormats nowadays are still working. One of the many prototypes with external exposure meter In July 1965 the first Nikkormat (FT) was introduced fitted with a Copal Square shutter, which was more or less a gamble, as that shutter wasn´t fully tested yet. In the early 1960´s Nikon had taken over - together with Konica (Sakura) - the Copal Co., producer of camera shutters. Several prototypes were made with and without built-in exposure meters and various shutters. In 1964 Nikon started to test a successor, the Nikkormat. Fitted with a Seiko shutter a second model (Nikkorex II) wasn´t better either. #Gale subwoofer manual series#These camera series - fitted with a non-interchangeable lens with a built-in Citizen shutter - were not as reliable as Nikon expected and therefore were not a great success. In 1960 the Nikkorex series was put on the market. ![]() ![]() #Gale subwoofer manual professional#When Nikon introduced the Nikon F in 1959, meant for the professional photographer, Nikon decided to introduce a single lens reflex camera for the amateur photographer, too. Despite the nameplate both models are 100% identical. Cameras in that series sold in Japan carry the name ´Nikomat´, while cameras sold abroad are named ´Nikkormat´. In the 1960´s Nikon Corporation introduced a series of cameras, of which most models are still used and working. at at M.Butkus' Nikomat / Nikkormat (Main technical specifications of all cameras in this chapter in a ) Nikkormat FS with early Nikkor-S 1.2/55mm.The self-timer lasts 8-10 seconds when fully wound it is not cancelable. Release cable compatibility: Multiple threads allow for Standard AR-3, AR-1, and AR-2 cables to be used. ![]() Mirror Lock-up is accessible through lever on the upper left side of the lens base. I would guess that most Nikkormat and Nikomat FT cameras are.įilm speeds from ASA 12 to 1600 are selected on the lower portion of the shutter speed adjustment ring. I just Googled 'nikon serial numbers' and a bunch of info. A usable modern-day battery is the Energizer EPX76. Viewable through viewfinder, and on the top of the body next to the film rewind lever. Features Metering: TTL, turned on when the film advance lever is flipped out 20 degrees. Due to the redirection of SLR user requirements towards more compact cameras (such as the and ), the Nikkormat FT3 barely lasted for two years, until 1979, to be replaced by the FM. The camera is rugged (as are the other mechanical-shutter Nikomat models) and is basically identical to its predecessor, the FT2, except for the automatic maximum aperture indexing (AI) system for lens-body meter coupling. Six years after the introduction of the professional F, the introduction of the in 1965 allowed to attract many more customers. It is still possible to use non-AI lenses through use of the stop-down button to close aperture manually. Manufactured from 1977 to 1979, this was the first Nikomat camera to use AI lenses thanks to wider and newer lens availability, this makes it a more attractive choice today than its predecessors. Black Nikkormat: FT3 serial-number prefix image by () This camera, released as the Nikomat FT3 in Japan, was released as the Nikkormat FT3 elsewhere. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |